New bridge issue

[Archived Post]

I beamed to my bridge and when I went to my ready room i noticed something odd....

this was on the justice bridge and, I circled the issue:

http://i38.tinypic.com/2a7bw94.jpg

as you can see at the bottom of doorjams you can see out into space

bug report #953,886.

[Archived Post]

Good eye .

[Archived Post]

Good eye .

Shouldn't that be "Good bye" as the air is sucked out and your blood begins to boil away?

Someone get a force field up!:D

[Archived Post]

You can actually also find this on SB1, Memory Alpha, DS9, SB39 and in several of the Exploration ground maps.

It is because the "cells" of the walls/ground and the "cell" next to it are slightly misaligned or missing just a pixel to be the proper size.

I had this troubble often when I was making maps for Fallout 3, through the G.E.C.K.

[Archived Post]

Danger, Hull Breach Immanent....

[Archived Post]

Thanks! I think we may have fixed this internally already but I'll check into it just in case.

[Archived Post]

Yeah I've seen this on other bridges as well.

[Archived Post]

Bug reported this when bridges were released on Tribble. Same bug was on the Defiant bridges.

[Archived Post]

Bug reported this when bridges were released on Tribble. Same bug was on the Defiant bridges.Yeah, be too. I bug reported it on Tribble before release and on Holodeck. I can't find my thread for the later, but here's the former (with tkt and loc and everything...)

http://forums.startrekonline.com/showthread.php?t=170242

Problem is the same on either server, last I check.

Oh, and this problem with the lounge too:
http://forums.startrekonline.com/showthread.php?t=170252

[Archived Post]

i found looooads of these whilst on the U.S.S. Warwick i seem to remember. they were way worse than this though, it was entire sections were missions textures, and whole spaces around the doors were missing.

[Archived Post]

I bugged some of the Klingon Bridges awhile back as well for the same issue.

[Archived Post]

A gap has been fixed in the doorways of Starfleet interiors that was allowing players to see into space. http://forums.startrekonline.com/showthread.php?t=178708
(Release Notes - September 2, 2010)

I checked my bridge/ready room yesterday, and the hole into space under the doorway between the two is still there. :(

[Archived Post]

I beamed to my bridge and when I went to my ready room i noticed something odd....

this was on the justice bridge and, I circled the issue:

http://i38.tinypic.com/2a7bw94.jpg

as you can see at the bottom of doorjams you can see out into space

bug report #953,886.

watch that first step it's a doozy :D

[Archived Post]

I've fond several clipping issues with the consoles throughout the interiors as well.

http://i857.photobucket.com/albums/ab139/Kenywolf/star%20trek%20online/screenshot_2010-09-05-19-21-25.jpg
http://i857.photobucket.com/albums/ab139/Kenywolf/star%20trek%20online/screenshot_2010-09-05-19-21-06.jpg
both of these for example are in the engineering lab

http://i857.photobucket.com/albums/ab139/Kenywolf/star%20trek%20online/screenshot_2010-09-05-19-14-07.jpg
This one is in the sick bay

http://i857.photobucket.com/albums/ab139/Kenywolf/star%20trek%20online/screenshot_2010-09-05-19-13-06.jpg this one is a case of misalignment of the wall support beam on the wall where the ready room connects to the bridge
http://i857.photobucket.com/albums/ab139/Kenywolf/star%20trek%20online/screenshot_2010-09-05-19-13-19.jpg and this is the other side of the very same wall, showing what it should look like.