Star Trek Online

Star Trek Online (http://sto-forum.perfectworld.com/index.php)
-   Klingon Fleetyards (http://sto-forum.perfectworld.com/forumdisplay.php?f=217)
-   -   For CaptnLogan on the Vorcha Cruiser (http://sto-forum.perfectworld.com/showthread.php?t=253269)

Archived Post 02-08-2012 03:51 PM

For CaptnLogan on the Vorcha Cruiser
 
As mentioned here http://www.outpostgamez.com/outpostg...captlogan.html

CaptnLogan seemed unaware of the current Vorcha Cruiser model's issues. The model currently in the game is almost as wide as it is long making it look more like a Bop than the cruiser its supposed to represent. The Vorcha on the Show as well as the model kits clearly show the ship is about 1,5 times longer than wide (general length to width ratio is similar to the Ktinga)

Here are some very nice pics that show the ships actual hull form. http://www.cygnus-x1.net/links/lcars...ck-cruiser.php

It should be relatively easy to fix the model by simply reducing its width a bit; easily done with most 3D modeling tools i know ;)

Archived Post 02-10-2012 01:54 AM

This has been brought up a few times, I mentioned it months ago, in a thread where we were asked about anything like this no less. I wouldn't hold my breath to be honest.

Archived Post 02-10-2012 02:22 AM

I personally like the in game Vor'Cha better then the longer original :)

Archived Post 02-10-2012 05:35 PM

Quote:

Originally Posted by The5thchild
Here are some very nice pics that show the ships actual hull form. http://www.cygnus-x1.net/links/lcars...ck-cruiser.php
;)

That is not the ships actual form.

I wouldn't trust the Cygnus drawings much at all. There are some obvious creative liberties in those designs.

For example:
The Cygnus Aft view shows obvious down curl of the hull towards the nacelles.
The fore view shows the same.

While screenshots found at Memory-Alpha show:
no curl Aft
same with a Fore view

If you keep looking and comparing between the Model used it the shows and the Cygnus sketches, it is easy to see another dozen+ errors in the proportions in the Cygnus drawings.

I wouldn't trust it for proper proportions to properly scale the in-game model.

Archived Post 02-10-2012 07:33 PM

I think this was a great question, i had wondered myself about this of the Vorcha but iam pleased to see that he will be looking into it.

Archived Post 02-12-2012 09:21 AM

Quote:

Originally Posted by kirian_darkstar (Post 4011183)
That is not the ships actual form.

I wouldn't trust the Cygnus drawings much at all. There are some obvious creative liberties in those designs.

For example:
The Cygnus Aft view shows obvious down curl of the hull towards the nacelles.
The fore view shows the same.

While screenshots found at Memory-Alpha show:
no curl Aft
same with a Fore view

If you keep looking and comparing between the Model used it the shows and the Cygnus sketches, it is easy to see another dozen+ errors in the proportions in the Cygnus drawings.

I wouldn't trust it for proper proportions to properly scale the in-game model.

The schematics are not the best.
But 5th is a RL friend of mine and I know he's got an AMT Vor'cha model on his shelf.
I'm on the phone with him while I'm writing this.
What he meant was only the top view, which is about right in terms of length/width proportions.
The rest of the schematics is not qiute accurate that's true, but he couldn't find a decent pic of the proper filming model that isn't angled so much it reveals no useful information.

I did a search myself and found a few pics I'd like to add to this thread:

A top view (with a superimposed Negh'var to show the two ships share the same neck)

http://img180.imageshack.us/img180/6...rvorchabo3.jpg

Pics of the AMT model

http://sovereignreplicas.com/wpsr/wp.../vor_cha11.jpg

http://sovereignreplicas.com/wpsr/wp.../vor_cha07.jpg


All times are GMT -7. The time now is 02:34 AM.