Star Trek Online

Star Trek Online (http://sto-forum.perfectworld.com/index.php)
-   The Academy (http://sto-forum.perfectworld.com/forumdisplay.php?f=127)
-   -   stuck on old news is good news walkthrough failed (http://sto-forum.perfectworld.com/showthread.php?t=420291)

howiebabey82 10-19-2012 07:50 PM

stuck on old news is good news walkthrough failed
 
did everything right up to the point where you need toTake Readings from Drained Lieutenant i followed these steps

You must now calibrate a cortical stimulator based upon your research:
Set the voltage for the resting potential to -70mV
Set the voltage for the action potential to +30mV
Set the sodium-potassium channel states to sodium external, potassium external and internal

and yes i harmonized the auxilory portal

so whats the problem? i followed all of the above steps and still dr mcoy is scanning and nothing is happening and i waited 15 mins

this is the walkthrough im using http://www.stowiki.org/Mission:_Ever...ew/Walkthrough

howiebabey82 10-19-2012 07:53 PM

also
 
when i click to talk on dr mccoy i see it twice talk to dr moccoy and yes i folowed both steps on both options still nothing

howiebabey82 10-19-2012 08:03 PM

the last things on my objectives are
 
help mccoy pioneer a rejeuvenation procedure,talk to dr mccoy and calibrate a cordical stimulator

oldkirkfan 10-19-2012 08:34 PM

Quote:

Originally Posted by howiebabey82 (Post 6179071)
help mccoy pioneer a rejeuvenation procedure,talk to dr mccoy and calibrate a cordical stimulator

After you calibrate the stimulator and talk to McCoy, watch his "Talk Bubbles". He will say that it worked, and to "Get this to the station commander". Or something similar. At this point, you are done. Continue on to the find the induction coil.

obertheromulan 10-19-2012 09:45 PM

There was a bug once, where entering the correct settings counted as false anyway.
Maybe it's back?

howiebabey82 10-20-2012 05:19 AM

still stuck
 
ok i got the induction coil too before italked to him mabe i did it inthe wrong order but no talk bubble comes up

oldkirkfan 10-20-2012 05:52 PM

Try installing the induction coil. Hopefully, it will let you continue.

I don't think you can do it in the wrong order. The steps usually don't become available until the current one is complete.

howiebabey82 10-20-2012 06:42 PM

beat the bugger lol
 
i just reloaded it hmm should i delete this thread or can i lol

howiebabey82 10-21-2012 03:39 PM

is it possible to delete this thread?
 
sense i got my question answrred or just leave it?

oldkirkfan 10-22-2012 09:24 PM

Leave it. Others may have the same issue, and find their answer here.

Eventually, if it isn't replied too, it will fall off the page and become buried.


All times are GMT -7. The time now is 09:44 AM.