View Single Post
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 18
01-20-2010, 09:59 PM
Quote:
Originally Posted by FFN View Post
Ran Furmark for about 4-5 mins. Seemed to be okay, no rebooting, no artefacts.

SpeedFan reports my voltage averages as:

Vcore: 1.13V
+12V: 11.56V
AVcc: 3.31V
Those are very solid. The 3.3v rail is above spec even under load for you (it doesn't vary that much anyways), and 11.5v on the 12v rail is still 96% of optimum voltage, which under load is very good. My general rule is that your in trouble with power if you get below 10.5 on the 12v rail. As for Vcore, I can't comment, as that's different for every machine, but as long as Prime95 says your stable if you run it, you're doing just fine.