View Single Post
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 3
01-21-2010, 09:43 AM
No seen plenty of other posts with ATI cards. I turn it down to half resolution and normally it works as long as there is not tons of combat happening. Been happening for awhile. Hope this is fixed before release because ground combat is stopping me completing the missions.

I got past 24 already but just flew by it again and tried it once more and didnt get anywhere near past the first corridor.

Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Processor: AMD Phenom(tm) II X4 965 Processor (4 CPUs), ~3.4GHz
Memory: 8192MB RAM
Available OS Memory: 8192MB RAM
Page File: 1433MB used, 14947MB available

Card name: ATI Radeon HD 5700 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter (0x68B8)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_68B8&SUBSYS_25431002&REV_00
Display Memory: 4079 MB
Dedicated Memory: 1012 MB
Shared Memory: 3067 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor Name: Generic Non-PnP Monitor
Monitor Model: unknown
Monitor Id:
Native Mode: unknown
Output Type: HD15
Monitor Name: Dell SE197FP
Monitor Model: DELL SE197FP
Monitor Id: DELF002
Native Mode: 1280 x 1024(p) (60.020Hz)
Output Type: HD15
Driver Name: atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,at idxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.14.0010.0716 (English)
Driver Version: 8.681.0.0
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 11/25/2009 02:50:14, 4683776 bytes