View Single Post
Career Officer
Join Date: Jun 2012
Posts: 238
# 2
11-08-2012, 03:47 AM
Originally Posted by sonoframon View Post
My PSU is rated @ 450 watts, but I don't see any 6-pin connectors to use. So my choices are limited to any cards that don't use that. I'm just looking for some advice and maybe a point in the right direction. Much thanks
Actually those 6-pin connectors also use +12V, something your power supply would already produce.
Assuming your PSU's wattage is sufficient, you shouldn't have any problems.
You can just get one of those adaptors that turns 2x 4-pin Molex connectors into a 6-pin.
In case of a multi-rail PSU, remember to check if enough of that power actually goes to those.

Vornek@oberlerchner123 - Join Date: July 2008

Last edited by obertheromulan; 11-08-2012 at 03:58 AM.