View Single Post
Lieutenant
Join Date: Jun 2012
Posts: 96
# 1 Fire at will accuracy bug?
12-04-2012, 04:52 PM
Hi folks,

I remember there was a post in the past about accuracy bonuses not being properly applied when using Fire-at-will power.

The reason I'm asking is because I recently acquired Phaser Beam arrays with ACC x3 and I tested it with ACT (Advanced Combat Tracker). During my testing, I noticed that the "to Hit" % increased on the phaser beam array with the accuracy bonuses but the "to Hit" % remained around 85 to 87% when Fire-at-will power is activated regardless of what type of phaser beam array I used. In my case, I compared it to a phaser beam array with Damage X3.

In a nutshell, there was a difference in the "hit" % between the ACCx3 and DMG X3 phaser arrays when no powers were being used, but when Fire-at-will was activated the "hit"% was roughly the same.

Does that mean the accuracy bonus the Phaser beam array is not being applied?

Anyone else notice this?