• EXCESSIVE size difference between models

Canon Inconsistencies:

Galaxy: (Incoming Fixes)

• Various texture issues, canonical stuff, etc
• Neck Impulse Engine should be further down and shaped like an oblong box. See Side by side pic and above model references
• Shuttle bays 2 & 3 positioned incorrectly, not wide enough. See above side by side.
• Spine that runs along the ventral stardrive section far too angular, nearly all of the structural lines on the ship should be smooth and flowing (See above side and model shots)
• The entire secondary hull is the wrong shape. It's sort of cylinder-ish when it should be conical. The tapering part at the back fits but it needs to broaden out quite a bit from that point to a large deflector (Please compare the STO model with the actual model shots above, Cap'n)
• The secondary hull should flow into the nacelle struts more smoothly
• None of the materials mimic the look of Canon Galaxy
• Requests exist to use the 6 foot Galaxy studio model as a reference instead of the 4 foot model
• Missing Battle Bridge superstructure from engineering hull post separation
• Deflector Inconsistency: In game 1 2 Series model shots can be found above. Series CGI shots: 1 2
• Missing registry beneath nacelles on struts.
• Missing RCS thrusters

• Dual Cannons/Beams on top Nacelle tips?!
• No warp core ejection ports
  Prometheus:
• Lower Nacelles do not glow during Warp Out sequence (Possibly also on other models)
• No windows on lower hull
• UV map for the saucer section produces "wavy" lines with texture's panels
• Pylons look more or less spot on if you look at them from above or below, however, side on they look somewhat poor with how they attach to the hull, so a bit of smoothing and tweaking in that area might not hurt. Starboard Port
• No running lights.
  Phoenix
• No windows on lower hull, too few on bridge superstructure to indicate ready room / conference room
• No shuttle bay
  Cerberus
• Lower Hull windows don't change with Window selection. They are always Type 1
• When pressing Cerberus preset in Ship Customization, lower Hull is set to Prometheus
• Deflector dish is cut off at the top

Canon Inconsistencies:

Prometheus class:

• There should be a miniature warp nacelle in that gap behind the main bridge.
• Dorsal and Ventral micro-nacelles should be lit during warp
• Area near main Deflector where Hull joins to Saucer is very strangely shaped. Should look more like Sovereign's/General Model inconsistency to Canon
• Shuttle bay should look like this

• No blinking lights opposed to other ships
• Polaris Bussard collectors have different 'backlight' texturing
• Comet class has the green starboard running light on both sides of the saucer.

Canon Inconsistencies:

Luna class:

• Escape pods are in wrong place, shouldn't be a ring around bottom of saucer
• Large windows (Arboretum-like as Constitution) are missing on Hull
• Lots of Canonical errors, Extensive windowing inconsistencies, missing lower pods, etc

Imperial class:

• NecroWulf drops it like it's hot

Noble class:

• Saucer, Starboard side - The 3rd row of windows from the edge of the saucer are broken and incomplete. While the flickering from them isn't as noticeable as it is with other vessels, such as the error with the Dervish saucer, there are numerous instances of window flicker across all tiers. Noble Saucer Windows
• Saucer, Starboard side - Staying on this side and moving to the front, there is a visible texture error with the ship name and registry number. The raised section on which it's applied causes it to partly snap off. It looks fine on the port side though. Noble Registry - Name

Canon Inconsistencies:

Sovereign class:
Sovereign reference shots from Doug Drexler's blog site. Thanks, Valiant797!
Sovereign reference shots contributed by Alexraptor
Super size reference shots contributed by Amosov
Studio model shots

• Main Deflector has the wrong color and patterns.
• Main Deflector is too large.
• Neck piece should not slope and stick up so much.
• Back of the primary hull is too flat and the shuttlebay squashed, needs more of a hump.
• Pylons are not supposed to curve upward, but have a relatively sharp bend and be straight.
• Quantum torpedo turret is missing.
• Saucer is far too thick.
• Missing windows on the underside of the saucer.
• Saucer is a little too long and narrow.
• Nacelle's do not have proper clearance over the saucer, though this is probably attributed to the saucer being too thick.
• Missing Phaser strips on nacelle pylons
• Deflector not yellow
• No red stripes/decals along hull
• Saucer edges too thick
• Missing lights on Neck and Saucer
• Engine Blocks too large, Engine Texturing could be different
• Saucer should be Smoother
• Overall geometry of the ship is incorrect. Here are some side by side comparison pics: 1 2 3 4
• Colour scheme from films missing