Go Back   Star Trek Online > Feedback > PvP Gameplay
Login

Reply
 
Thread Tools Display Modes
Lt. Commander
Join Date: Dec 2007
Posts: 120
I run and Noble Assault Cruiser. My ship is equipped with Purple Mk X Plasma Weapons. A dual and two beam arrays with a Quantum torp in my forward array. I have three plasma and a plasma torp in the rear.

For shields I am using the purple MK X Corvarent Cap 3 that gives cruisers 8400 shield strength.

Consoles.
I am running two Mk XI blue +18 Kinetic and +18 all energy weapons resistance . One +90 EPS power regulator and the Mk XI blue +35% shield capacity.

I am running 2 Mk X green +15 deflector to help transfer shield strength 2

I am running 2 Mk XI green +24 plasma weapons and one MK XI green +24 Torp Weapons.

My current BOF powers

Tac Ens: High Yield 1,
Tac Lieutenant: Beam Overload 1, High Yield 2

Eng Commander: Emg Power to Shields1, Eng Team 2, Emer Power to Shields 3 and Aceton Field 3
Eng Lieut Commander: Emg Power to Weapons 1, Eng Team 2, and Reverse Shield Polarity 2

Sci Lieutenant: Sci Team 1 and Transfer Shield Strength 2.

My Powers
Evasive Maneuvers 3, Rotate Shield Frequency 3, Miracle Worker 3, Brace for Impact 3, EPS power transfer 3, Nadion Inversion 3,
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 2
08-12-2010, 10:26 PM
Weapon Wise you seem to be in good shape. And it's interesting you are using a Plasma build.

Consoles, you appear to be okay.

Tac BO: Beam Overload 2 is good, but you could exchange that LT slot for Target Shield Subsystems, which could lead to a deadly combo with a High Yield Plasma Torp.

Sci BO: Sounds good to have to counter Sci Debuffs and TSS for shield resist boosts with your second EptS.


Engineering BO: I'd replace RSP2 with Engineering Team 3 and replace one of the Eng Team 2 with RSP1.

You could also switch out EptW1 with ET1 (ET1's cooldown is faster than ET3, which can help out in pinches). And replace the second ET2 with EptW2.

Commander: ET1 + RSP1 + EptS3 + Aceton 3
Lt Cmdr: EPtS1 + EptW2 (or another RSP) + ET3
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 3
08-12-2010, 10:46 PM
I tried the RSP 1 and ET3 but to me it seemed that RSP1 didn't help. I would toss the buff and i would still die lol
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 4
08-12-2010, 10:56 PM
May I ask how RSP1 didn't help?
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 5
08-13-2010, 01:38 AM
Quote:
Originally Posted by Azurian View Post
May I ask how RSP1 didn't help?
DEM + Bleedthrough
SNB
B:TSS/Tyken/yaddayadda


Lt. Commander
Join Date: Dec 2007
Posts: 120
# 6
08-13-2010, 05:52 AM
RSP doesn't help It merely prolongs the encounter by 15 seconds unless its removed first
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 7
08-13-2010, 07:03 AM
This thread is just full of.. potential.

Et1 faster cd then ET3?.. lol
Rsp is the same at any version.
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 8
08-13-2010, 07:08 AM
make sure your captain skills support your Captain and BOff abilites by checking in the character skills UI window. (use the pulldown menu in the upper corner to see which skills you have that affect the abilites you can use)
It helps.
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 9
08-13-2010, 07:44 AM
Quote:
Originally Posted by saberous View Post
I run and Noble Assault Cruiser. My ship is equipped with Purple Mk X Plasma Weapons. A dual and two beam arrays with a Quantum torp in my forward array. I have three plasma and a plasma torp in the rear.

For shields I am using the purple MK X Corvarent Cap 3 that gives cruisers 8400 shield strength.

Consoles.
I am running two Mk XI blue +18 Kinetic and +18 all energy weapons resistance . One +90 EPS power regulator and the Mk XI blue +35% shield capacity.

I am running 2 Mk X green +15 deflector to help transfer shield strength 2

I am running 2 Mk XI green +24 plasma weapons and one MK XI green +24 Torp Weapons.

My current BOF powers

Tac Ens: High Yield 1,
Tac Lieutenant: Beam Overload 1, High Yield 2

Eng Commander: Emg Power to Shields1, Eng Team 2, Emer Power to Shields 3 and Aceton Field 3
Eng Lieut Commander: Emg Power to Weapons 1, Eng Team 2, and Reverse Shield Polarity 2

Sci Lieutenant: Sci Team 1 and Transfer Shield Strength 2.

My Powers
Evasive Maneuvers 3, Rotate Shield Frequency 3, Miracle Worker 3, Brace for Impact 3, EPS power transfer 3, Nadion Inversion 3,

do you use balance shields?
Lt. Commander
Join Date: Dec 2007
Posts: 120
# 10
08-13-2010, 08:16 AM
Quote:
Originally Posted by Zorena
do you use balance shields?
And I notice 5 different (7 including RSF and MW) shield heals, and 2 (3 including MW) hull heals (neither of which provides resists)..

Id swap the TSS2 for HE2 tbh
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


All times are GMT -7. The time now is 09:17 AM.